Tripp Lite HDMI over Cat5/Cat6 Active Video Extender / Remote Repeater 1080p 175' - video/audio extender
$313.60
$205.99
Mfg # B126-110
CDW # 2623411
Quick tech specs
- Works w/ Tripp Lite’s B126-Series transmitters/receivers to extend HDMI signal via Cat5e/6 cable to multiple projectors/monitors/TVs in a chain
- Connect up to 3 units in a chain for maximum extension
- HDMI Cat5 extender/ HDMI Cat6 extender/ HDMI over Cat 5 extender/ HDMI over Cat 6 extender/ HDMI Extender over Cat6/ HDMI extender over Cat5/ HDMI Video/Audio Extender
- Extends 1080i(60 Hz) signal up to 175 ft
- Supports HD resolutions up to 1080p(60 Hz) and 7.1-channel surround sound audio
Know your gear
The B126-110 remote repeater unit can be added to your Tripp Lite B126-Series HDMI over Cat5 installation to increase the extension distance and/or add additional monitors. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). Supports 24-bit True Color (8-bits per channel), HDCP, 3D, and both stereo audio and 7.1 channel surround sound audio (7.1 channel surround sound signal will be Multi-Channel or PCM). Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
Installation is simple; just insert the B126-110 repeater into the middle of your installation. In the case of a B126-1A1 extender kit, the transmitter is connected to the HDMI source using a Tripp Lite P568-Series HDMI cable (not included). It is then connected via Cat5e/6 cable to the B126-110, which is connected via Cat5e/6 cable to the B126-1A1 receiver unit. Finally, a monitor is connected to each remote receiver and repeater unit using Tripp Lite P568-Series HDMI cable (not included).
Connect up to three repeaters, with a receiver unit located at the end of the installation, for a total of 4 displays. A 1080p (60Hz) signal can be extended up to 125 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080p (60Hz) signal can be extended up to 500 ft. A 1080i (60Hz) signal can be extended up to 175 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080i (60Hz) signal can be extended up to 700 ft. A 3D signal can be extended up to 100 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 3D signal can be extended up to 400 ft.
Installation is simple; just insert the B126-110 repeater into the middle of your installation. In the case of a B126-1A1 extender kit, the transmitter is connected to the HDMI source using a Tripp Lite P568-Series HDMI cable (not included). It is then connected via Cat5e/6 cable to the B126-110, which is connected via Cat5e/6 cable to the B126-1A1 receiver unit. Finally, a monitor is connected to each remote receiver and repeater unit using Tripp Lite P568-Series HDMI cable (not included).
Connect up to three repeaters, with a receiver unit located at the end of the installation, for a total of 4 displays. A 1080p (60Hz) signal can be extended up to 125 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080p (60Hz) signal can be extended up to 500 ft. A 1080i (60Hz) signal can be extended up to 175 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 1080i (60Hz) signal can be extended up to 700 ft. A 3D signal can be extended up to 100 ft for each repeater in the installation. In a full 4 level chain (3 repeaters, 1 receiver), a 3D signal can be extended up to 400 ft.
Add to Compare